Orbiter F2.85 Direct Drive Extruder for 2.85mm TPU Filament
Designed for 2.85mm Filament | Dual-Drive Gears | Compact Direct Drive | Flexible Filament Printing
Better Filament Feeding for 2.85mm TPU!
Looking for a compact extruder designed specifically for 2.85mm flexible filament?
The Orbiter F2.85 is a high-precision direct drive extruder developed by Robert Lorincz in cooperation with LDO Motors.
Its compact design and dual-drive gearing make it an excellent starting point for custom 3D printers using 2.85mm TPU, TPE and other compatible materials.
Key Features
1. Designed for 2.85mm Filament
Unlike conventional 1.75mm extruders, the Orbiter F2.85 is developed for larger-diameter filament feeding.
Ideal for compatible custom 2.85mm printing systems.
2. Dual-Drive Gear System
The dual-drive design grips filament from both sides, helping provide controlled extrusion and reduce filament slipping.
Especially useful when working with flexible materials.
3. Compact Direct Drive Design
The compact direct drive configuration helps keep the filament path short and reduces unnecessary feeding resistance.
A practical design for TPU printing applications.
4. Suitable for Flexible TPU
Designed for extruder configurations using flexible filaments, including TPU and TPE.
For softer TPU grades such as 85A, 80A and 75A, proper filament guidance, drying, feed resistance and extrusion calibration are essential.
5. Open-Source Design
Based on the Orbiter F2.85 project, with original design files and project information available online.
Product Specifications
| Specification |
Details |
| Design |
Orbiter F2.85 |
| Application |
Direct Drive Filament Extrusion |
| Filament Diameter |
2.85mm |
| Filament Drive |
Dual Drive |
| Compatible Materials |
TPU, TPE and other suitable filaments |
| Installation |
Custom Printer / DIY Assembly |
| Original Designer |
Robert Lorincz |
| Project Collaboration |
LDO Motors |
⚠️ Important Notes
-
This extruder is designed for 2.85mm filament, not standard 1.75mm filament.
-
A compatible 2.85/3.0mm hotend and filament path are required.
-
Confirm motor, drive gear and mounting compatibility before assembly.
-
Very soft TPU may require reduced printing speed and carefully adjusted gear tension.
-
Keep the PTFE filament path as short and unrestricted as possible.
-
Dry TPU before printing according to the filament manufacturer's instructions.
-
Successful printing of 75A or softer TPU is not guaranteed by the extruder alone.
-
Check the selected package contents before ordering.
Original Project
Orbiter F2.85 – Designed by Robert Lorincz
Official Project:
https://www.orbiterprojects.com/orbiter-f2-85/
Original 3D Model:
https://www.thingiverse.com/thing:4860182
Build Your 2.85mm TPU Printing System
Compact Direct Drive. Dual-Gear Feeding. Designed for 2.85mm Filament.


